Power Brick Controller User Manual
Receiving and Unpacking
22
RECEIVING AND UNPACKING
Delta Tau products are thoroughly tested at the factory and carefully packaged for shipment. When the
Power Brick Controller is received, there are several things to be done immediately:
Observe the condition of the shipping container and report any damage immediately to the commercial
carrier that delivered the package.
Remove the equipment from the shipping container and remove all packing materials. Check all
shipping material for connector kits, documentation, or other small pieces of equipment. Be aware that
some connector kits and other equipment pieces may be quite small and can be accidentally discarded
if care is not used when unpacking the equipment. The container and packing materials may be retained
for future shipment.
Verify that the part number of the product received is the same as the part number listed on the purchase
order.
Inspect the equipment for external physical damage that may have been sustained during shipment and
report any damage immediately to the commercial carrier.
Electronic components in this product are design-hardened to reduce static sensitivity. However, use
proper procedures when handling the equipment.
If the equipment is to be stored for several weeks before use, be sure that it is stored in a location that
conforms to published storage humidity and temperature specifications.
Use of Equipment
The following restrictions will ensure the proper use of the Power Brick Controller:
The components built into electrical equipment or machines can be used only as integral components
of such equipment.
The unit must not be operated on power supply networks without a ground or with an asymmetrical
ground.
If the unit is used in residential areas, or in business or commercial premises, implement additional
filtering measures.
The unit may be operated only in a closed switchgear cabinet, taking into account the ambient
conditions defined in the environmental specifications.
