DeviceNet Slave Communication Module IFD9502
DVP-PLC Application Manual
1
Warning
3
Please read this instruction carefully before use and follow this instruction to operate the device in order to prevent
damages on the device or injuries to staff.
3
Switch off the power before wiring.
3
IFD9502 is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity,
electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g.
key or specific tools are required for operating the enclosure) in case danger and damage on the device may occur.
3
IFD9502 is to be used for controlling the operating machine and equipment. In order not to damage it, only
qualified professional staff familiar with the structure and operation of IFD9502 can install, operate, wire and
maintain it.
3
DO NOT connect input AC power supply to any of the I/O terminals; otherwise serious damage may occur. Check
all the wirings again before switching on the power and DO NOT touch any terminal when the power is switched
on. Make sure the ground terminal
is correctly grounded in order to prevent electromagnetic interference.
Table of Contents
1
INTRODUCTION...................................................................................................................................3
1.1
IFD9502 Brief ............................................................................................................................3
1.2
Features ....................................................................................................................................3
2
COMPONENTS ....................................................................................................................................4
2.1
Product Profile and Outline .......................................................................................................4
2.2
DeviceNet Connector ................................................................................................................4
2.3
Address Setup Rotary Switch....................................................................................................5
2.4
Function Setup DIP Switch........................................................................................................5
2.5
Communication ports on IFD9502.............................................................................................6
3
FUNCTIONS OF IFD9502 ....................................................................................................................7
3.1
When IFD9502 is connected to Delta VFD series AC motor drive ............................................7
3.2
When IFD9502 is connected to Delta DVP series programmable logic controller ..................10
3.3
When IFD9502 is connected to Delta DTA temperature controller..........................................13
3.4
When IFD9502 is connected to Delta ASD-A series servo drive.............................................16
3.5
When IFD9502 is connected to Delta DOP-A series human machine interface .....................19
3.6
When IFD9502 is connected to custom equipment.................................................................22
4
LED INDICATORS & TROUBLE-SHOOTING....................................................................................26
4.1
Network Status LED ................................................................................................................26
4.2
Module Status LED..................................................................................................................26
4.3
Scan Port LED.........................................................................................................................26
5
DEVICENET OBJECTS IFD9502 SUPPORTS ..................................................................................27
