DeviceNet Slave Communication Module IFD9502
DVP-PLC Application Manual
25
setting.
Instance2 EEPROM read/write:
Attribute ID (decimal)
Access rule
Name
Default
30
Get/Set
AMD reset parameter
H’0000
71
Get/Set
PLC reset parameter
H’0000
90
Get/Set
DTA reset parameter
H’0000
150
Get/Set
ASDA reset parameter
H’0000
224
Get/Set
DOP reset parameter
H’0000
200
Get/Set
Custom reset parameter
H’0000
In the custom mode, if you are to return the I/O mapping of AC motor drive to default
setting, change Attribute30 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of PLC to default setting,
change Attribute71 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of temperature controller to
default setting, change Attribute90 of Instance2 of Class 0x9F into H’0001 and re-power
IFD9502.
In the custom mode, if you are to return the I/O mapping of servo drive to default
setting, change Attribute150 of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of HMI to default setting,
change Attribute224of Instance2 of Class 0x9F into H’0001 and re-power IFD9502.
In the custom mode, if you are to return the I/O mapping of the custom equipment to
default setting, change Attribute200 of Instance2 of Class 0x9F into H’0001 and re-power
IFD9502.
Common Services:
Implemented for
Service Code
Class
Instance
Service name
005 Yes Yes
Reset
0x0E Yes Yes
Get_Attribute_Single
0x10 No Yes
Set_Attribute_Single
Instance3 Modbus baud rate setting
Attribute ID
(decimal)
Access rule
Name
Range
(Note 1)
Default value
(Note 1)
1
Get/Set
AMD baud rate setting
1 ~ 2
2
2
Get/Set
PLC baud rate setting
1 ~ 4
4
3
Get/Set
DT baud rate setting
1 ~ 2
2
4
Get/Set
ASDA baud rate setting
1 ~ 4
4
5
Get/Set
DOP baud rate setting
1 ~ 4
4
6
Get/Set
CUSTOM baud rate setting
1 ~ 4
1
Note 1: The baud rates of the codes are in the table below.
