Delta Electronics CMC-DN01, Operation Manual

Page: 3 / 27

DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual 1
Warning
3
This operation manual provides introduction on the functions, specifications, installation, basic operation
and settings for CMC-DN01 and the network protocol.
3
This is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust,
humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from
operating the device (e.g. keys or specific tools are required to open the enclosure) in case danger and
damage on the device may occur. DO NOT touch any terminal when the power is switched on.
3
Please read this operation manual thoroughly and follow the instructions in case damages on the device
or injuries on the operation staff occur.
Table of Content
1 INTRODUCTION TO CMC-DN01 .........................................................................................................3
1.1 Features ....................................................................................................................................3
1.2 Specifications ............................................................................................................................3
2 PRODUCT PROFILE AND OUTLINE ..................................................................................................4
2.1 Parts ..........................................................................................................................................4
2.2 DeviceNet Port ..........................................................................................................................4
3 BASIC OPERATION.............................................................................................................................5
3.1 Installation .................................................................................................................................5
4 VFD-C2000 SERIES AC MOTOR DRIVE AND DEVICENET MASTER ..............................................6
4.1 Data Exchange in DeviceNet ....................................................................................................7
4.2 Mapping of CMC-DN01 .............................................................................................................7
4.3 Establishing I/O Connection ......................................................................................................8
5 CONSTRUCTING A DEVICENET NETWORK.....................................................................................9
5.1 Constructing a DeviceNet Network through CMC-DN01...........................................................9
5.2 Configuring the Network by DeviceNet Builder ....................................................................... 11
5.3 Data Mapping ..........................................................................................................................17
5.4 Editing Ladder Diagrams in PLC .............................................................................................17
6 ERROR CODES ON KEY PAD ..........................................................................................................17
7 LED INDICATORS AND TROUBLE-SHOOTING ..............................................................................18
7.1 POWER LED...........................................................................................................................18
7.2 NS LED ...................................................................................................................................18
7.3 MS LED ...................................................................................................................................19
APPENDIX: DEVICENET OBJECTS SUPPORTED .................................................................................20
DeviceNet Objects List........................................................................................................................20
Class 0x01 – Identity objects ..............................................................................................................20