DeviceNet Slave Communication Card CMC-DN01
DVP-PLC Operation Manual
6
[Figure 3]
Constructing a DeviceNet network
(Figure 4) The DVPDNET-SL module is the DeviceNet master. CMC-DN01 and the VFD-C2000 series AC
motor drive construct the DeviceNet slave. Use the software DeviceNet Builder to configure the DeviceNet
network.
[Figure 4]
Disconnecting CMC-DN01 from VFD-C2000
①
Remove the two screws (Figure 5).
②
Twist open the card clip, insert the slotted screwdriver to the hollow and prize the PCB off the card clip
(Figure 6).
③
Twist open the other card clip to remove the PCB (Figure 7).
[Figure 5]
[Figure 6]
[Figure 7]
4 VFD-C2000 Series AC Motor Drive and DeviceNet Master
In this section, we will explain the relation between Delta VFD-C2000 series AC motor drive and the
