Delmhorst navigator pro, Owner'S Manual

Page: 21 / 30

 No connection to the PC. The Base Unit must be connected to the PC through a USB
cable. Check connection.
b. KBD: This message occurs when the user presses a key during communications. Do not
push any key on the meter during data transfer. The meter interprets this as a request to
escape this activity and returns to the Main Menu. The base unit should return to a green
LED status in a few seconds. A message should appear on the PC screen as well, indicating
lost communications.
c. Sync: This message occurs when data framing is lost during data transmission. This would
only happen if the wireless link becomes unreliable. Ensure the meter and base unit are
aligned and restart the session.
d. Data E : This message occurs when the content of a correctly framed data packet is invalid.
Again, this is an unreliable wireless link problem.
NOTE: Individual records cannot be downloaded to the PC. The entire storage content is
delivered to the PC during a link session.
SETUP MENU:
The Setup group of features allows access to the configurable parameters of the meter. They are:
Date and Time, Power-off time, Backlight, Conversions (temperature mode and electrode type)
and Pin Mode Alarm. All can only be accessed in the Setup Menu.
To get to the Setup Menu,
use the

keys to highlight option #4: SETUP .
SETUP MENU ENTRY DESCRIPTIONS:
 Return to Main Menu: This menu option returns the meter to Main Menu. The meter
also returns to Main Menu if no user input is detected for 20 seconds.

Set Date and Time: This menu option allows user access to the date and time set
screen:
The Date and Time set screen is populated with the time and date values present in the
meter at access time.

key action switches the row selection among available
parameters.

key action changes the selected parameter’s value. All parameter values
are incremented using the

key and decremented using the

key. The DAY parameter