Delmhorst navigator pro, Owner'S Manual

Page: 18 / 30

At any time, you may modify Temperature (T), location (LOC), or switch to
SCAN
mode
( GOTO SCAN ).
The EXIT option in both SCAN and PIN MODE menus will cancel the measurement
process and will put the meter in the
MAIN MENU
.
TO TAKE TEMP/RH READINGS IN ENHANCED MODE:
Before entering the RH-T mode, firmly insert the RH/T-S1 sensor into the top of the meter,
making sure to align the pin-out on the DIN connector.
1.
From the ENHANCED Main Menu
, use the

key to highlight
RH-T MODE
. Then,
press the SELECT key to get into the RH-T mode main menu.
The meter will display the main RH-T mode main menu, as shown below:
2. The meter will begin taking readings.
MAIN MENU OPTIONS:
STORAGE:
1. While in the ENHANCED main menu, use the

keys to highlight option #5
STORAGE
.
2. Press the SELECT key to enter the storage sub menu. There are three available selections in
this menu:

STORED READINGS – choose either Pin readings or Scan readings
.