1.
From the Enhanced Main Menu,
use the
keys to highlight
JOB DEF.
2.
Select a job number (from 1 to 5
), using the
keys.
3.
Press the
key and highlight DONE
. Press
SELECT.
If the job was previously defined and used, you will be asked if you want to “Update” the
job.
4.
Select YES if you want new measurements
stored under the same job number.
If it is a new job, the next screen will allow you to completely define the job.
To define a job means
to choose between residential or commercial, allocate a 3 digit job ID
number, specify the temperature at which measurements will be taken, select from a list of each
of the rooms in which measurements will be taken, and select the materials used for each
location.
TO CHOOSE BETWEEN RESIDENTIAL AND COMMERCIAL:
Highlight the word COMMERCIAL and press the SELECT key. The following screen will appear:
Summary of Contents for navigator pro
Page 28: ...Blank page...
