Commercial jobs show a list of 32 numerical locations as listed below:
3. With
NEXT
and
BACK
you will be able to scroll five pages of room listings.
APPENDIX A
contains the list of all available rooms and the abbreviation used for each of them.
To save your settings, use
key to highlight
DONE
and press the
SELECT
key.
Note:
In order to move more quickly through the five pages of room listings,
you may use the
key when the cursor is at the top of a page to bring
you down to the bottom of the next page. By doing this and then using
the
key to highlight
NEXT
you will scroll through the pages more
quickly.
Each room will have up to three
AREAS
for measurements:
FLOOR
,
WALLS
and
CEILING
. If
you choose
YES
for a room you may now select the material used for each location.
1.
Press the SELECT key
while the cursor highlights that room and the
SELECT
MATERIAL
menu will be displayed.
2.
Using the
keys
, select the material or species for that particular room.
Note
: The default selection is
OAK
for the floor and
SHEETROCK
for the wall and
ceiling. If you are not going to test one of the materials in a room, use the
keys
until the word
NONE
is displayed. This will turn off the ability to read that particular area
in a room.
3.
After you have selected each material
in a room, highlight
DONE
press the
SELECT
key so that your selections will be saved. This will bring you back to the list of available
rooms. Continue the same procedure as above for each room that you are testing.
Available materials are: Sheetrock®, Plaster, Gypcrete, Concrete, SPF, Oak, Maple, Birch,
Plywood, OSB, Particleboard , Douglas Fir. Select NONE if you are not testing that location.
Summary of Contents for navigator pro
Page 28: ...Blank page...
