manualshive.com logo in svg

Dell SC4020, Deployment Manual

Share
Download
Dell SC4020 Deployment Manual Download Page 136

c. (Optional) Type a descriptive name in the 

User Alias

 field.

Figure 123. Configure Embedded iSCSI Ports

6.

(Optional) Change the preferred physical port for one or more virtual ports.
a. Click 

Edit Virtual Ports

. The wizard displays a list of virtual ports.

b. For each virtual port that you want to modify, select the preferred physical port in the 

Preferred 

Physical Port

 field.

c. When you are finished, click 

Apply Changes

. The 

iSCSI

 tab opens.

7.

If you do not plan to use an iSCSI port, make sure that the port is not configured.
a. Set the 

Purpose

 field to 

Unknown

.

b. Set the 

Fault Domain

 field to 

<none>

.

c. (Optional) Type a descriptive name in the 

User Alias

 field.

Configure Front-End SAS Ports

The front-end SAS ports of an SC4020 storage system cannot be configured using the Storage Center 

Startup Wizard.
To configure the front-end SAS ports of an SC4020 storage system, see the 

Dell SC4020 Storage System 

Front-End SAS Configuration Tech Note

.

Configure Back-End SAS Ports

Use the 

SAS

 tab to configure the back-end SAS ports.

1.

Click the 

SAS

 tab.

136

Set up Storage Center Software

Summary of Contents for SC4020

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands