manualshive.com logo in svg

Dell SC4020, Deployment Manual

Share
Download
Dell SC4020 Deployment Manual Download Page 132

f. Click 

Continue

. The dialog box displays a summary.

g. Click 

Create Now

.

h. Repeat the previous steps to create additional fault domains as needed.
i. When you are finished creating fault domains, click 

Return

. The 

iSCSI

 tab opens.

3.

To use the embedded iSCSI port for iSCSI replication, configure the port numbered Slot 3/Port 2 on 
each storage controller.
a. Set the 

Purpose

 field to 

Front End

.

b. Set the 

Fault Domain

 field to the appropriate fault domain that you created.

c. (Optional) Type a descriptive name in the 

User Alias

 field.

Figure 118. Configure the iSCSI Port

4.

To use the embedded MGMT and iSCSI ports for iSCSI replication or front-end connectivity, 

configure the ports numbered Slot 3/Port 1 and Slot 3/Port 2 on each storage controller.
a. Set the 

Purpose

 field to 

Front End

.

b. Set the 

Fault Domain

 field to the appropriate fault domain that you created.

c. (Optional) Type a descriptive name in the 

User Alias

 field.

132

Set up Storage Center Software

Summary of Contents for SC4020

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands