manualshive.com logo in svg

Dell SC4020, Deployment Manual

Share
Download
Dell SC4020 Deployment Manual Download Page 128

Figure 114. Configure Local Ports

a. Configure the 

Purpose

, 

Fault Domain

, and 

User Alias

 for all transport types (FC, iSCSI, SAS).

b. Click 

Assign Now

. The Startup Wizard informs you that the port configuration has been 

generated.

7.

Click 

Continue

. The 

Generate SSL Cert

 page opens.

Related links

Configure Local Ports

Configure Local Ports

Configure the front-end ports and back-end ports on an SC4020.
The following table shows the port purposes for transport types in Virtual Port Mode.

Table 17. Port Purposes in Virtual Port Mode

Port Purpose

Description

Unknown

One of the following:
• Port purpose is not yet defined.
• The port is unused.

Front End

Port is connected to servers and is used for the server I/O path or the port is 

connected to another Storage Center and used for replication.

Back End

Port is connected to an expansion enclosure.

The following table shows the port purposes for transport types in Legacy Mode.

Table 18. Port Purposes in Legacy Mode

Port Purpose

Description

Unknown

One of the following:
• Port purpose is not yet defined.

128

Set up Storage Center Software

Summary of Contents for SC4020

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands