manualshive.com logo in svg

Dell PowerEdge T410, Hardware Owner'S Manual

The Dell PowerEdge T410 is a robust server designed for small to medium-sized businesses. With its powerful performance and versatile features, this server ensures secure and efficient operations. Explore its capabilities and optimize your experience by accessing the comprehensive Technical Manual – available for free download at manualshive.com.

Share
Download
background image

Installing System Components

93

Figure 3-6.

Removing and Installing the Cooling Shroud

Installing the Cooling Shroud

1

Align the cooling shroud with the alignment guides in the system.

2

Hold the touch points on the cooling shroud and carefully lower the 
cooling shroud into the system. Ensure that no cables are pinned under 
the edges of the cooling shroud.

3

Hold the touch points and lower the expansion card stabilizer.

4

Close the system. See "Closing the System" on page 91.

5

Place the system upright and on its feet on a flat, stable surface. 

6

Rotate the system feet outward.

7

Reattach any peripherals, then connect the system to the electrical outlet. 

8

Turn on the system and attached peripherals.

1

expansion card stabilizer touch 
points (2)

2

expansion card stabilizer

3

cooling shroud

4

cooling shroud touch points (2)

1

2

3

4

book.book  Page 93  Tuesday, June 9, 2009  4:09 PM

Summary of Contents for PowerEdge T410













































































































































































































Reviews:

No comments

Related manuals for PowerEdge T410

Patton electronics 1084 Installation And Operation Manual preview
1084
Brand: Patton electronics Pages: 16
Oracle Talari E1000 Installation Manual preview
Talari E1000
Brand: Oracle Pages: 24
hilscher CIFX 104 User Manual preview
CIFX 104
Brand: hilscher Pages: 154
Wintech TDS510USB Plus Installation Manual preview
TDS510USB Plus
Brand: Wintech Pages: 21
Zoom B9.1ut Operation Manual preview
B9.1ut
Brand: Zoom Pages: 88
Ericsson Marconi OMS 1200 Product Description preview
Marconi OMS 1200
Brand: Ericsson Pages: 136
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Brand: Buffalo Pages: 71
Advantech ARK-1380 User Manual preview
ARK-1380
Brand: Advantech Pages: 50
Harman BSS DCP-555 Installation Manual preview
BSS DCP-555
Brand: Harman Pages: 24
Lattice Semiconductor LatticeMico GPIO Manual preview
LatticeMico GPIO
Brand: Lattice Semiconductor Pages: 28
Renesas R8C/2F Quick Start Manual preview
R8C/2F
Brand: Renesas Pages: 6
NuDAQ ACL-8112 Series User Manual preview
ACL-8112 Series
Brand: NuDAQ Pages: 92
Digital Watchdog Compressor DW-CP04 User Manual preview
Compressor DW-CP04
Brand: Digital Watchdog Pages: 73
Intel P4000CR Installation Instructions Manual preview
P4000CR
Brand: Intel Pages: 11
WATT & WELL SECC Series Getting Started preview
SECC Series
Brand: WATT & WELL Pages: 15
Extron electronics DVI Output Card Installation Manual preview
DVI Output Card
Brand: Extron electronics Pages: 6
Extron electronics IPL M PDP-ES User Manual preview
IPL M PDP-ES
Brand: Extron electronics Pages: 36
Cambium Networks PTP 850E User Manual preview
PTP 850E
Brand: Cambium Networks Pages: 560

Brands by name

Popular brands

Load more brands