Dell PowerEdge T410, Hardware Owner'S Manual

Page: 70 / 204

70
Using the System Setup Program and UEFI Boot Manager
PCI IRQ Assignment Screen
Serial Communication Screen
Option Description
<PCIe device> Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Option Description
Serial Communication
(
On without Console
Redirection default)
Options are On without Console Redirection , On with
Console Redirection via COM1 , On with Console
Redirection via COM 2, and Off .
Serial Port Address Specifies the address of the serial ports
External Serial Connector
(
Serial Device1 default)
Specifies whether Serial Device1 , Serial Device2 , or
Remote Access Device has access to the external serial
connector.
Failsafe Baud Rate
(
115200 default)
Displays the failsafe baud rate used for console
redirection. This rate should not be adjusted.
Remote Terminal Type
(
VT100/VT220 default)
Options are VT100/VT220 or ANSI .
Redirection After Boot
(
Enabled default)
Enables or disables BIOS console redirection after the
operating system boots.
book.book Page 70 Tuesday, June 9, 2009 4:09 PM