Dell PowerEdge H730P User Manual Download

Page: 40 / 101

BIOS Configuration Utility

The

BIOS Configuration Utility

, (<Ctrl> <R>), is a storage management application embedded on the

PERC H730P card that configures and maintains RAID disk groups and virtual disks. <Ctrl> <R> is
independent of the operating system.

NOTE: Use the

BIOS Configuration Utility

(<Ctrl> <R>) for initial setup and disaster recovery. You

can use advanced features through Dell OpenManage storage management application and Dell
SAS RAID storage manager.

The following sections provide information about using the

BIOS Configuration Utility

(<Ctrl> <R>). For

more information, see the online help option by pressing <F1> in the

BIOS Configuration Utility

(<Ctrl>

<R>).

NOTE: The PERC H730P card configuration utility refreshes the screen every 15 seconds to show
changes to the information. You can also press <F5> to refresh the screen.

Entering The BIOS Configuration Utility

Perform the following steps to enter the

BIOS Configuration Utility

(<Ctrl> <R>) when you boot the

system:

Turn on the system.
A BIOS screen displays information about the controller and configuration.

During startup, press <Ctrl> <R> when prompted by the BIOS screen.

Use the arrow keys to select the RAID controller you want to configure, and press <Enter> to access

the management menus for the controller.
If there is only one controller, the

Virtual Disk Management

screen for that controller is displayed. If

there is more than one controller, the main menu screen is displayed. The screen lists the RAID
controllers.

NOTE: You can access multiple controllers through the

BIOS Configuration Utility

(<Ctrl> <R>)

by pressing <F12>.

NOTE: You can access PERC H700, H800, H310, H710, H710P, H810P, or H730P cards from the
same BIOS if the controller firmware is 6.2.0-0013 or later.

NOTE: If you enter the option ROM of PERC H730P, you can access the option ROM of both
H730P and H810 adapters.

Exiting The Configuration Utility

To exit the

BIOS Configuration Utility

(<Ctrl> <R>)

Press <Esc> on any menu screen.
If there is only one controller, then a dialog box is displayed to confirm your choice.

Select

to exit and press <Enter>.

If multiple controllers are present, then the <Esc> key brings you to the

Controller Selection

screen.

Press <Esc> again to reach the exit screen.
A dialog box is displayed to confirm your choice.

Select

to exit and press <Enter>.

Summary of Contents for PowerEdge H730P






































































































Search results

Summary of Contents for PowerEdge H730P

Reviews:

Related manuals for PowerEdge H730P

Brands by name

Popular brands

Dell PowerEdge H730P, User Manual

Search results

Summary of Contents for PowerEdge H730P

Reviews:

Related manuals for PowerEdge H730P

Brands by name

Popular brands