Dell PowerEdge H730P User Manual Download

Page: 33 / 101

Driver Installation

The Dell PowerEdge RAID Controller (PERC) H730P card requires software drivers to operate with the

supported operating systems.

This chapter contains the procedures for installing the drivers for the PERC H730P card.

NOTE: For more information on VMware ESX drivers, see the VMware ESX documentation at

dell.com/support/manuals

NOTE: To check operating system compatibility, see

dell.com/support/manuals

The two methods for installing a driver discussed in this chapter are:

Installing a
driver during
operating
system
installation

Use this method if you are performing a new installation of the operating system
and want to include the drivers.

Updating
existing drivers

Use this method if the operating system and the PERC H730P family of controllers
are already installed and you want to update to the latest drivers.

Pre-Installation Requirements For Windows Driver

Installation

Before you install the operating system:

• Read the Microsoft

Getting Started

document that shipped with your operating system.

• Ensure that your system has the latest BIOS, firmware, and driver updates. If required, download the

latest BIOS, firmware, and driver updates from

dell.com/support

• Create a device driver media (diskette, USB drive, CD, or DVD).

Creating The Device Driver Media For Windows Driver

Installation

Use one of the following two methods to create the device driver media:

• Downloading drivers from the Dell systems service and diagnostic tools media for Windows
• Downloading drivers from the Dell support website for Windows

Summary of Contents for PowerEdge H730P






































































































Search results

Summary of Contents for PowerEdge H730P

Reviews:

Related manuals for PowerEdge H730P

Brands by name

Popular brands

Dell PowerEdge H730P, User Manual

Search results

Summary of Contents for PowerEdge H730P

Reviews:

Related manuals for PowerEdge H730P

Brands by name

Popular brands