Dell POWEREDGE 840 Hardware Owner'S Manual Download Page 137

Page: 137 / 158

Getting Help

137

Korea (Seoul)

International Access Code:

001

Country Code:

City Code:

E-mail: [email protected]

Support

toll-free: 080-200-3800

Support (Dimension, PDA, Electronics and
Accessories)

toll-free: 080-200-3801

Sales

toll-free: 080-200-3600

Fax

2194-6202

Switchboard

2194-6000

Latin America

Customer Technical Support (Austin, Texas,
U.S.A.)

512 728-4093

Customer Service (Austin, Texas, U.S.A.)

512 728-3619

Fax (Technical Support and Customer Service)
(Austin, Texas, U.S.A.)

512 728-3883

Sales (Austin, Texas, U.S.A.)

512 728-4397

SalesFax (Austin, Texas, U.S.A.)

512 728-4600

or 512 728-3772

Luxembourg

International Access Code:

Country Code:

352

Website:

support.euro.dell.com

Support

342 08 08 075

Home/Small Business Sales

+32 (0)2 713 15 96

Corporate Sales

26 25 77 81

Customer Care

+32 (0)2 481 91 19

Fax

26 25 77 82

Macao

Country Code:

853

Technical Support

toll-free: 0800 105

Customer Service (Xiamen, China)

34 160 910

Transaction Sales (Xiamen, China)

29 693 115

Country (City)
International Access Code
Country Code
City Code

Department Name or Service Area,

Website and E-Mail Address

Area Codes,

Local Numbers, and

Toll-Free Numbers

Summary of Contents for POWEREDGE 840































































































































































Search results

Summary of Contents for POWEREDGE 840

Reviews:

Related manuals for POWEREDGE 840

Brands by name

Popular brands

Dell POWEREDGE 840, Hardware Owner'S Manual

Search results

Summary of Contents for POWEREDGE 840

Reviews:

Related manuals for POWEREDGE 840

Brands by name

Popular brands