Dell POWEREDGE 840 Hardware Owner'S Manual Download Page 129

Page: 129 / 158

Getting Help

129

Canada (North York, Ontario)

International Access Code:

011

Online Order Status:

www.dell.ca/ostatus

AutoTech (automated Hardware and Warranty
Support)

toll-free: 1-800-247-9362

Customer Service (Home Sales/Small Business)

toll-free: 1-800-847-4096

Customer Service (med./large business,
government)

toll-free: 1-800-326-9463

Customer Service (printers, projectors, televisions,
handhelds, digital jukebox, and wireless)

toll-free: 1-800-847-4096

Hardware Warranty Support (Home Sales/Small
Business)

toll-free: 1-800-906-3355

Hardware Warranty Support (med./large bus.,
government)

toll-free: 1-800-387-5757

Hardware Warranty Support (printers, projectors,
televisions, handhelds, digital jukebox, and wireless)

1-877-335-5767

Sales (Home Sales/Small Business)

toll-free: 1-800-387-5752

Sales (med./large bus., government)

toll-free: 1-800-387-5755

Spare Parts Sales & Extended Service Sales

1 866 440 3355

Cayman Islands

E-mail: [email protected]

Technical Support

toll-free: 1-877-261-0242

Chile (Santiago)

Country Code:

City Code:

Website:

www.dell.com/cl

E-mail: [email protected]

Sales and Customer Support

toll-free: 1230-020-4823

Technical Support (CTC)

toll-free: 800730222

Technical Support (ENTEL)

toll-free: 1230-020-3762

Country (City)
International Access Code
Country Code
City Code

Department Name or Service Area,

Website and E-Mail Address

Area Codes,

Local Numbers, and

Toll-Free Numbers

Summary of Contents for POWEREDGE 840































































































































































Search results

Summary of Contents for POWEREDGE 840

Reviews:

Related manuals for POWEREDGE 840

Brands by name

Popular brands

Dell POWEREDGE 840, Hardware Owner'S Manual

Search results

Summary of Contents for POWEREDGE 840

Reviews:

Related manuals for POWEREDGE 840

Brands by name

Popular brands