Dell PowerEdge 7250 User Manual Download Page 94

Page: 94 / 102

Glossary

www

.del

com |

ppo

rt.

ll.

integrated host adapter circuitry.) To add a SCSI

expansion bus to your system, you must install or

connect the appropriate host adapter.

HPFS

Abbreviation for the High Performance File System

option in the Windows NT operating systems.

HTTP

Abbreviation for Hypertext Transfer Protocol. HTTP

is the client-server TCP/IP protocol used on the World

Wide Web for the exchange of HTML documents.

HTTPS

Abbreviation for HyperText Transmission Protocol,

Secure. HTTPS is a variant of HTTP used by Web

browsers for handling secure transactions. HTTPS is a

unique protocol that is simply SSL underneath HTTP.

You need to use "https://" for HTTP URLs with SSL,

whereas you continue to use "http://" for HTTP URLs

without SSL.

Abbreviation for identifier, commonly used when

referring to a user identifier (user ID), object identifier

(object ID), or hardware identifier (controller ID).

IDE

Abbreviation for Integrated Drive Electronics. IDE is

a computer system interface, used primarily for hard

drives and CDs.

I/O

Abbreviation for input/output. The keyboard is an

input device, and a printer is an output device. In

general, I/O activity can be differentiated from

computational activity. For example, when a program

sends a document to the printer, it is engaging in

output activity; when the program sorts a list of terms,

it is engaging in computational activity.

internal microprocessor cache

An instruction and data cache built in to the

microprocessor. The Intel Pentium microprocessor

includes a 16-KB internal cache, which is set up as an

8-KB read-only instruction cache and an 8-KB

read/write data cache.

IP address

Abbreviation for Internet Protocol address. See

TCP/IP.

IPMI

Abbreviation for Intelligent Platform Management

Interface, which is an industry standard for

management of peripherals used in enterprise systems

based on Intel

architecture. The key characteristic of

IPMI is that inventory, monitoring, logging, and

recovery control functions are available independent of

the main processors, BIOS, and operating system.

IRQ

Abbreviation for interrupt request. A signal that data

is about to be sent to or received by a peripheral device

travels by an IRQ line to the microprocessor. Each

peripheral connection must be assigned an IRQ

number. For example, the first serial port in your

system (COM1) is assigned to IRQ4 by default. Two

devices can share the same IRQ assignment, but you

cannot operate both devices simultaneously.

Abbreviation for kilobyte(s), 1024 bytes.

key combination

A command requiring you to press multiple keys at the

same time. For example, you can reboot your system

by pressing the <Ctrl><Alt><Del> key

combination.

LAN

Acronym for local area network. A LAN system is

usually confined to the same building or a few nearby

buildings, with all equipment linked by wiring

dedicated specifically to the LAN.

Summary of Contents for PowerEdge 7250







































































































Search results

Summary of Contents for PowerEdge 7250

Reviews:

Related manuals for PowerEdge 7250

Brands by name

Popular brands

Dell PowerEdge 7250, User Manual

Search results

Summary of Contents for PowerEdge 7250

Reviews:

Related manuals for PowerEdge 7250

Brands by name

Popular brands