73
Remote Console Switch Software Basic Operations
Figure 4-5. Configure Tiered Switches Dialog Box
10
When complete, click
Finish
to exit the Wizard and return to the main
window. Your Remote Console Switch should now be in the
Unit Selector
pane.
To discover a Remote Console Switch:
1
Select
Tools - Discover
from the Explorer menu from the Remote Console
Switch Software. The Discover Wizard appears. Click
Next
to continue.
2
The
Address Range
page appears. Complete one of the following steps:
If you are using IPv4 mode, select
Use IPv4 address range
, and type the
range of IP addresses you wish to search on the network in the
To Address
and
From Address
boxes. Use the IP address dot notation xxx.xxx.xxx.xxx.
-or-
If you are using IPv6 mode, select
Use IPv6 subnet
, and specify the
IPv6
network prefix
.
3
You may also change the default HTTP and HTTPS port numbers, if the
Remote Console Switch has changed from the default on the serial
console, by typing the new port numbers in the
HTTP Port
and
HTTPS
Port
fields. Click
Next
to continue.
