manualshive.com logo in svg

Dell PowerEdge 180AS, User Manual

The Dell PowerEdge 180AS Cable Routing Manual is an essential resource for efficiently managing cables in your server infrastructure. This comprehensive manual provides step-by-step instructions and diagrams to ensure optimal cable organization. Download this manual for free from our website to streamline cable routing in your PowerEdge 180AS server.

Share
Download
background image

Product Overview

1

1

Product Overview

The multiuser, Dell™ 2161DS-2/4161DS/2321DS Remote Console Switch 

integrates Dell field-proven digital keyboard, video and mouse (KVM) 

switching technology with advanced cable management, flexible access for up 

to four simultaneous users, and a patented, next-generation user interface. 

The Remote Console Switch features user-side USB and PS/2 ports that 

support major device platforms.
Using powerful on-screen management through the OSCAR

®

 interface, 

Remote Console Switch Software, or on-board web interface provides easy 

system configuration and device selection.

Remote Console Switch Features and Benefits

SIP Intelligent Module

The Remote Console Switch also provides SIP intelligent module capability. 

The SIP module with CAT 5 design dramatically reduces cable clutter, while 

providing optimal resolution and video settings. The built-in memory of the 

SIP module simplifies configuration by assigning and retaining unique device 

names and Electronic ID (EID) numbers for each attached device. The SIP 

module is powered directly from the device and provides Keep Alive 

functionality even if the Remote Console Switch is not powered. 
PS/2 and USB SIP modules are available allowing direct KVM connectivity to 

devices. A USB2 virtual media SIP is also available. Each Remote Console 

Switch has up to 32 Analog Rack Interface (ARI) ports for connecting SIP 

modules. 
Utilizing the SIP module, you can attach additional switches to expand your 

Remote Console Switch system. This flexibility allows you to add capacity as 

your data center grows. 

Summary of Contents for PowerEdge 180AS

























































































































































































































































































Reviews:

No comments

Related manuals for PowerEdge 180AS

Eaton Network Shutdown Module V3 User Manual preview
Network Shutdown Module V3
Brand: Eaton Pages: 65
Alcatel Genesys 7.5 Course Information preview
Genesys 7.5
Brand: Alcatel Pages: 2
Novell GROUPWISE 7 - WEB ACCESS Manual preview
GROUPWISE 7 - WEB ACCESS
Brand: Novell Pages: 110
TC Electronic RESTORATION SUITE User Manual preview
RESTORATION SUITE
Brand: TC Electronic Pages: 31
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
F-SECURE POLICY MANAGER 7.0 - Administrator'S Manual preview
POLICY MANAGER 7.0 -
Brand: F-SECURE Pages: 241
Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual preview
LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS
Brand: Adobe Pages: 90
Extreme Networks Ridgeline 3.0 Manual preview
Ridgeline 3.0
Brand: Extreme Networks Pages: 376
Konica Minolta Crown Print Monitor+ Administrator'S Manual preview
Crown Print Monitor+
Brand: Konica Minolta Pages: 28
Intel SMALL BUSINESS SERVER Manual preview
SMALL BUSINESS SERVER
Brand: Intel Pages: 79
Autodesk AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS Manual preview
AUTOCAD PANDID 2011 - SYSTEM REQUIREMENTS
Brand: Autodesk Pages: 2
Autodesk AUTOCAD MEP Brochure preview
AUTOCAD MEP
Brand: Autodesk Pages: 6
Autodesk AUTOCAD 2010 - Manual preview
AUTOCAD 2010 -
Brand: Autodesk Pages: 62
Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started preview
466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010
Brand: Autodesk Pages: 84
Autodesk 22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP Network Manual preview
22906-010000-9325 - UPG FROM AUTOCAD 2000I-NET BUMP
Brand: Autodesk Pages: 104
SMC Networks ELITEVIEW Management Manual preview
ELITEVIEW
Brand: SMC Networks Pages: 232
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual preview
256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010
Brand: Autodesk Pages: 1638
LaCie 131018 - StorView Snapshot - Mac User Manual preview
131018 - StorView Snapshot - Mac
Brand: LaCie Pages: 214

Brands by name

Popular brands

Load more brands