Dell PowerConnect M6220, User Configuration Manual

Page: 754 / 1294

754
Configuring L2 Multicast Features
mvr Enable MVR on the switch.
mvr vlan
vlan-id
Set the VLAN to use as the multicast VLAN for MVR.
mvr querytime
time
Set the MVR query response time. The value for
time
is in
units of tenths of a second.
mvr mode {compatible |
dynamic}
Specify the MVR mode of operation.
mvr group
mcast-address
[ groups ]
Add an MVR membership group.
•
mcast-address
—The group IP multicast address
•
group
—Specifies the number of contiguous groups
interface
interface
Enter interface configuration mode for the specified port.
The
interface
variable includes the interface type and
number, for example gigabitethernet 1/0/3 .
You can also specify a range of ports with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12
configures interfaces 8, 9, 10, 11,
and 12.
mvr Enable MVR on the port.
mvr immediate Enable MVR immediate leave mode on the port.
mvr type {source |
receiver}
Specify the MVR port type.
mvr vlan vlan-id group
mcast-address
Allow the port to participate in the specified MVR group.
The
vlan-id
parameter is the ID of the MVR multicast
VLAN.
CTRL + Z Exit to Privileged EXEC mode.
show ip dhcp snooping
[interfaces]
View the DHCP snooping global and per port
configuration.
show ip dhcp snooping
binding
[{
static
|
dynamic }] [ interface
port ] [ vlan vlan-id ]
View the entries in the DHCP snooping bindings database.
show mvr
View information about the administrative mode of MVR.
show mvr members
View information about MVR groups and their members.
Command Purpose