Dell PowerConnect M6220, User Configuration Manual

Page: 1167 / 1294

Configuring Class-of-Service
1167
Configuring Interface Queue Drop Probability
Beginning in Privileged Exec mode, use the following commands in to
configure characteristics of the drop probability and view related settings. The
drop probability supports configuration in the range of 0 to 10%, and the
discrete values 25%, 50%, and 75%. Values not listed are truncated to the next
lower value in hardware.
CLI Command Description
configure
Enter Global Configuration mode.
interface interface
Enter Interface Configuration mode, where
interface
is replaced by gigabitethernet
unit/slot/port , tengigabitethernet unit/slot/port , or
port-channel
port-channel number
.
random-detect queue-parms
queue-id [ queue-id ...] min-
thresh
min1 min2 min3 min4
max-thresh max1 max2 max3
max4
drop-prob
prob1 prob2
prob3 prob4
Configure the maximum and minimum thresholds
for one or more queue IDs on a WRED-enabled
interface queue.
You can also use this command in Global
Configuration mode to configure the same
parameters for one or more queues on all interfaces.
exit Exit to Global Config mode.
exit
Exit to Privilege Exec mode.
show interfaces random-detect
Display WRED parameters for an interface or all
interfaces.