Dell PowerConnect M6220, User Configuration Manual

Page: 328 / 1294

328
Configuring SNMP
SNMP Configuration Examples
This section contains the following examples:
• Configuring SNMPv1 and SNMPv2
• Configuring SNMPv3
Configuring SNMPv1 and SNMPv2
This example shows how to complete a basic SNMPv1/v2 configuration. The
commands enable read-only access from any host to all objects on the switch
using the community string
public
, and enable read-write access from any
host to all objects on the switch using the community string
private
.
This example also shows how to allow the switch to generate traps for all
features that produce traps. The traps are sent to the host with an IP address
of 192.168.3.65 using the community string
public
.
To configure the switch:
1 Configure the public community string.
console# configure
console(config)# snmp-server community public ro
2 Configure the private community string.
console(config)# snmp-server community private rw
3 Enable all traps and specify the IP address of the host where the traps
should be sent.
console(config)# snmp-server enable traps all
console(config)# snmp-server host 192.168.3.65
public
console(config)# exit
4 View the current SNMP configuration on the switch.
console# show snmp
Community-String Community-Access View Name IP Address
-------------------- ---------------- --------- -------
private Read/Write Default All
public Read Only Default All