Dell PowerConnect J-8208, Hardware Manual

Page: 45 / 276

card is shipped with 48 dust covers (in the accessory bag). Each port has two LEDs. See
“Network Port LEDs in a J-EX8200 Switch” on page 31.
Figure 13: 48-port SFP Line Card
The line card has two status LEDs labeled ON and ST on the faceplate that indicate the
online and status information for the line card. See “Line Card LEDs in a J-EX8200 Switch”
on page 30.
Related
Documentation
8-port SFP+ Line Card in a J-EX8200 Switch on page 27
•
•
48-port RJ-45 Line Card in a J-EX8200 Switch on page 29
•
Optical Interface Support in J-EX8200 Switches on page 45
•
Installing a Line Card in a J-EX8200 Switch on page 122
•
Handling and Storing Line Cards in J-EX8200 Switches on page 179
48-port RJ-45 Line Card in a J-EX8200 Switch
The line cards in J-EX8200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions.
J-EX8200 switches use the following types of line cards:
•
8-port SFP+ line card
• 48-port SFP line card
• 48-port RJ-45 line card
You can use any combination of line cards in a J-EX8200 switch.
The 48-port RJ-45 line card for J-EX8200 switches (see Figure 14 on page 30) has 48
10/100/1000 Gigabit Ethernet ports with RJ-45 connectors on the faceplate. Each port
has two LEDs. See “Network Port LEDs in a J-EX8200 Switch” on page 31.
29
Chapter 2: Component Descriptions