Dell PowerConnect J-8208, Hardware Manual

Page: 43 / 276

Figure 11: SF Module LEDs in a J-EX8208 Switch
Table 16: SF Module LEDs of a J-EX8208 Switch
State and Description Color LED (Description)
• On steadily—SF module is operating normally.
• Blinking—Waiting to be configured by the master Switch Fabric
and Routing Engine (SRE) module.
Green ST (Status)
SF module has failed. Yellow
SF module is offline. Unlit
On steadily—Switch fabric in SF module is operating normally.
Blinking—Switch fabric in SF module is offline.
Green SF (Switch Fabric)
On steadily—Switch fabric in SF module has failed. Yellow
SF module is powered off. Unlit
Related
Documentation
Installing an SF Module in a J-EX8208 Switch on page 120
•
•
Removing an SF Module from a J-EX8208 Switch on page 169
•
Taking the SF Module Offline in a J-EX8208 Switch on page 168
8-port SFP+ Line Card in a J-EX8200 Switch
The line cards in J-EX8200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. The line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions.
J-EX8200 switches use the following types of line cards:
• 8-port SFP+ line card
•
48-port SFP line card
•
48-port RJ-45 line card
27
Chapter 2: Component Descriptions