46
|
Wireless Network
Dell PowerConnect W-Series Instant Access Point
6.2.0.0-3.2.0.0
|
User Guide
Figure 31
- Adding an Employee Network— VLAN Tab
5. Select the required Client IP assignment option —
Virtual Controller assigned
or
Network
assigned
.
If you select
then
Virtual Controller assigned
The client obtains the IP address from the
Virtual Controller. The Virtual Controller
creates a private subnet and VLAN on the W-
IAP for the wireless clients.
The Virtual Controller NATs all traffic that
passes out of this interface. This setup
eliminates the need for complex VLAN and IP
address management for a multi site wireless
network. See
"Virtual Controller" on page
109
for configuring the DHCP server.
Network assigned
By default, the client VLAN is assigned to the
native VLAN on the wired network.
l
Default— The client obtains the IP address
in the same subnet as the W-IAPs.
l
Static— Select to specify a single VLAN, a
comma separated list of VLANS, or a range
of VLANs for all clients on this network.
l
Dynamic— Select to create rules for per-
user VLAN assignment. See
"VLAN
Derivation Rule " on page 150
for more
information.
NOTE:
Select the
Static
option in the
Client
VLAN assignment
section to configure VLAN
pooling. See
"VLAN Pooling" on page 69
for
additional details.
Table 5
- Conditions for Client IP and VLAN assignment
6. Click
Next
to continue.
Summary of Contents for PowerConnect B-RX4
Page 1: ...Dell PowerConnect W Series Instant Access Point 6 2 0 0 3 2 0 0 User Guide ...
Page 228: ...228 AirGroup Dell PowerConnect W Series Instant Access Point 6 2 0 0 3 2 0 0 User Guide ...
Page 248: ...248 Monitoring Dell PowerConnect W Series Instant Access Point 6 2 0 0 3 2 0 0 User Guide ...
