Dell POWER EDGE SC1430 Hardware Owner'S Manual Download Page 136

Page: 136 / 160

136

Getting Help

Hong Kong

International Access Code:

001

Country Code:

852

Website: support.ap.dell.com

Technical Support E-mail: [email protected]

Technical Support (Dimension and Inspiron)

2969 3188

Technical Support (OptiPlex, Latitude, and Dell
Precision)

2969 3191

Technical Support (PowerApp™, PowerEdge™,
PowerConnect™, and PowerVault™)

2969 3196

Customer Care

3416 0910

Large Corporate Accounts

3416 0907

Global Customer Programs

3416 0908

Medium Business Division

3416 0912

Home and Small Business Division

2969 3105

India

E-mail: [email protected]
[email protected]
[email protected]

Technical Support

1600338045

and 1600448046

Sales (Large Corporate Accounts)

1600 33 8044

Sales (Home and Small Business)

1600 33 8046

Country (City)
International Access Code
Country Code
City Code

Department Name or Service Area,

Website and E-Mail Address

Area Codes,

Local Numbers, and

Toll-Free Numbers

book.book Page 136 Monday, June 5, 2006 1:51 PM

Summary of Contents for POWER EDGE SC1430

































































































































































Search results

Summary of Contents for POWER EDGE SC1430

Reviews:

Related manuals for POWER EDGE SC1430

Brands by name

Popular brands

Dell POWER EDGE SC1430, Hardware Owner'S Manual

Search results

Summary of Contents for POWER EDGE SC1430

Reviews:

Related manuals for POWER EDGE SC1430

Brands by name

Popular brands