Dell PERC H700 User Manual Download Page 99

Page: 99 / 178

Configuring and Managing RAID

Clearing the Configuration

You can delete all virtual disks on the RAID controller by performing

the operation.
To clear the configuration, perform the following steps in the

BIOS

Configuration Utility

Press <Ctrl><N> to access the

VD Mgmt

screen.

Use the arrow keys to move the cursor to the

Controller

heading.

Press <F2>. The action menu is displayed.

Select

Clear Config

A pop-up window is displayed prompting for confirmation to delete all

virtual disks.

Select

to delete the virtual disks or

YES

to retain the existing

configuration.

BIOS Configuration Utility Menu Options

The first menu that is displayed when you access the

BIOS Configuration

Utility

is the main menu screen. It lists the controller, controller number, and

other information, such as the slot number. On the screen, you can use the

arrow keys to select the RAID controller you want to configure. Press

<Enter> to access the controller.
This section describes the options for the

BIOS Configuration Utility

for

each of the major menus:

•

Virtual Disk Management (VD Mgmt)

•

Physical Disk Management (PD Mgmt)

•

Controller Management (Ctrl Mgmt)

•

Foreign Configuration View (Foreign View)

PERC7.2_UG.book Page 99 Thursday, March 3, 2011 2:14 PM

Summary of Contents for PERC H700



















































































































































































Search results

Summary of Contents for PERC H700

Reviews:

Brands by name

Popular brands

Dell PERC H700, User Manual

Search results

Summary of Contents for PERC H700

Reviews:

Brands by name

Popular brands