manualshive.com logo in svg

Dell PERC H700, User Manual

Share
Download
Dell PERC H700 User Manual Download Page 116

116

CacheCade

• Importing a CacheCade drive may result in a RAID 0 VD. You will need to 

reconfigure the CacheCade VD after importing.

• CacheCade virtual disks are not presented to the operating system.

Configuring and Managing CacheCade Virtual 

Disks

The Dell OpenManage storage management application and the controller’s 

BIOS Configuration Utility (<Ctrl><R>) allow the creation and deletion of 

CacheCade virtual disks.
The following sections describe the menu options specific to CacheCade 

virtual disk management and provide detailed instructions to perform the 

configuration tasks. The contents of the following section apply to the BIOS 

Configuration Utility. For more information on the management 

applications, see "Configuring and Managing RAID" on page 81.

CacheCade Virtual Disk Management 

The 

Virtual Disk Management 

screen is the first screen that is displayed 

when you access a RAID controller from the main menu screen on the BIOS 

Configuration Utility. 
The following are CacheCade-related actions you can perform through the 

virtual disk management menu:

• Create CacheCade virtual disk
• Assign CacheCade virtual disk name
• Delete virtual disk

Create CacheCade Virtual Disk

 

NOTE: 

Only SSDs can be used to create CacheCade virtual disks.

 

NOTE: 

Combining SAS and SATA SSDs within a CacheCade virtual disk is not 

supported. 

 

NOTE: 

To avoid inefficient use of space, it is recommended that CacheCade 

volumes are created with drives of the same size. Larger disk sizes are truncated to 

the size of the smallest contributing disk, similar to RAID 0.

PERC7.2_UG.book  Page 116  Thursday, March 3, 2011  2:14 PM

Summary of Contents for PERC H700



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands