Dell PERC H700 User Manual Download

Page: 72 / 178

Driver Installation

Installing Driver During a Windows Server 2008, Windows Server 2008

R2 Installation

Boot the system using the Windows Vista, Windows Server 2008,

Windows 7 Server or Windows Server 2008 R2 media.

Follow the on-screen instructions until you reach

Where do you want to

install Vista/2008/7

window

and then select

Load driver

The system prompts you to insert the media. Insert the installation media

and browse to the proper location.

Select the appropriate PERC H700 or H800 card from the list, click

Next

and continue installation.

NOTE:

The Windows Server 2008 R2 operating system includes native drivers

for the PERC H700 and H800 cards. For driver updates, see the Drivers and

Downloads section at support.dell.com.

Installing Windows Server 2008, Windows Server 2008 R2, Windows

Server 2003 for a New RAID Controller

Perform the following steps to configure the driver for the RAID controller on

a system that already has Windows installed:

Turn off the system.

Install the new RAID controller in the system.
For detailed instructions on installing and cabling the RAID controller in

the system, see "Installing and Configuring Hardware" on page 41.

Turn on the system.

The

Found New Hardware Wizard

screen displays the detected hardware

device.

NOTE:

Windows Server 2008 R2 has native drivers for the PERC adapters. The

system automatically detects the controller and installs the drivers. Check the

version of the driver and update if required.

Click

Next

On the

Locate device driver

screen, select

Search for a suitable driver for

my device

and click

Next

Browse and select the drivers from the

Locate Driver Files

screen.

Click

Next

PERC7.2_UG.book Page 72 Thursday, March 3, 2011 2:14 PM

Summary of Contents for PERC H700



















































































































































































Search results

Summary of Contents for PERC H700

Reviews:

Related manuals for PERC H700

Brands by name

Popular brands

Dell PERC H700, User Manual

Search results

Summary of Contents for PERC H700

Reviews:

Related manuals for PERC H700

Brands by name

Popular brands