manualshive.com logo in svg

Dell PERC H700, User Manual

Share
Download
Dell PERC H700 User Manual Download Page 63

Installing and Configuring Hardware

63

Transferring a TBBU or TNVC Between PERC 

H800 Cards

The TBBU or TNVC provides uninterrupted power supply for up to 48 hours 

to a cache memory module. If the controller fails as a result of a power failure, 

you can move the TBBU or TNVC to a new controller and recover the data. 

The controller that replaces the failed controller should not have any prior 

configuration.
Perform the following steps to replace a failed controller with data in the 

TBBU:

1

Perform a controlled shutdown on the system in which the PERC H800 is 

installed, as well as any attached storage enclosures.

2

Disconnect the system from the electrical outlet and remove the system 

cover.

3

Remove the controller that has the TBBU or TNVC.

4

Remove the TBBU or TNVC from the controller.

5

Insert the TBBU or TNVC in the new controller.
For more information on installing the TBBU or TNVC, see "Installing the 

TBBU or TNVC on a PERC H800 Adapter" on page 61.

6

Insert the replacement controller in the system.
See the relevant sections on installing controllers under "Installing the 

PERC H700 and H800 Adapters" on page 41.

7

Reconnect all external storage enclosures as they were originally connected 

and turn on the enclosures.

8

Replace the system cover, re-connect the system to the electrical outlet 

and turn on the system.
The controller flushes the cache data to the virtual disks.

PERC7.2_UG.book  Page 63  Thursday, March 3, 2011  2:14 PM

Summary of Contents for PERC H700



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands