Dell Networking W-ClearPass Guest 6.0, Deployment Manual

Page: 192 / 320

192 | About Customizing SMTP Email Receipt Fields Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
l
Always send using ‘cc:’ – The Copies To list is always sent a copy of any guest account receipt (even if no
guest account email address is available).
l
Always send using ‘bcc:’ – The Copies To list is always sent a blind copy of any guest account receipt (even
if no guest account email address is available).
l
Use ‘cc:’ if sending to a visitor – If a guest account email address is available, the email addresses in the
Copies To list will be copied.
l
Use ‘bcc:’ if sending to a visitor – If a guest account email address is available, the email addresses in the
Copies To list will be blind copied.
5. To preview and verify the appearance of the email receipt, you can send yourself or another person a test message.
In the Test Mail Settings area, enter the test message recipient’s email address, then click Send Test Message .
The test message is sent immediately.
Figure 31:
Example of Email Receipt Test Message Content
6. When all fields on the form are completed, click Save and Close .
About Customizing SMTP Email Receipt Fields
The behavior of email receipt operations can be customized with certain guest account fields. You do this on a per-
user basis.
l
smtp_enabled – This field may be set to a non-zero value to enable sending an email receipt. If unset, the default
value from the email receipt configuration is used. The special values “_Auto” (Always auto-send guest receipts
by email), “_AutoField” (Auto-send guest receipts by email with a special field set), “_Click” (Display a link
enabling a guest receipt via email), and “_Cc” (Send an email to a list of fixed addresses) may also be used.
l
smtp_subject – This field specifies the subject line for the email message. Template variables appearing in the
value will be expanded. If the value is “default”, the default subject line from the email receipt configuration is
used.