Dell Networking 7048, Reference Manual

Page: 314 / 1788

314
Address Table Commands
•
max-addr
— The maximum number of addresses that can be learning on
the port. (Range: 0-600)
Default Configuration
The default value for this command is 100.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet)
mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example shows using this command in Ethernet Interface
Configuration mode.
console(config-if-Te1/0/3)# port security max 80
show mac address-table multicast
Use the show mac address-table multicast command in Privileged EXEC
mode to display Multicast MAC address table information.
Syntax
show mac address-table multicast
[
vlan vlan-id
] [
address
{
mac-multicast-
address
|
ip-multicast-address
}] [
format
{
ip
|
mac
}]
•
vlan_id
— A valid VLAN ID value.
•
mac-multicast-address
— A valid MAC Multicast address.
•
ip- multicast-address —
A valid IP Multicast address.
• format
—
Multicast address format. Can be ip or mac .
Default Configuration
If format is unspecified, the default is mac .
2CSPC4.X7000-SWUM204.book Page 314 Friday, March 15, 2013 8:22 AM