Dell Networking 7048, Reference Manual

Page: 1075 / 1788

IPv6 Routing Commands
1075
no ipv6 nd ra-interval
•
maximum
— The maximum interval duration (Range: 4–1800 seconds).
•
minimum
— The minimum interval duration (Range: 3 – (0.75 *
maximum) seconds).
Default Configuration
600 is the default value for
seconds
.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
The minimum interval cannot be larger than 75% of the maximum interval.
Example
The following example sets the transmission interval between router
advertisements at 1000 seconds.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd ra-interval 1000
ipv6 nd ra-lifetime
Use the ipv6 nd ra-lifetime command in Interface Configuration mode to set
the value that is placed in the Router Lifetime field of the router
advertisements sent from the interface.
Syntax
ipv6 nd ra-lifetime
seconds
no ipv6 nd ra-lifetime
•
seconds
— Lifetime duration. The value must be zero, or it must be an
integer between the value of the router advertisement transmission
interval and 9000 seconds. A value of zero means this router is not to be
used as the default router. (Range: 0-9000)
2CSPC4.X7000-SWUM204.book Page 1075 Friday, March 15, 2013 8:22 AM