Dell Networking 7048, Reference Manual

Page: 1602 / 1788

1602
SNMP Commands
snmp-server v3-host
Use the snmp-server v3-host command in Global Configuration mode to
specify the recipient of Simple Network Management Protocol Version 3
(SNMPv3) notifications. To remove the specified host, use the no form of
this command.
Syntax
snmp-server v3-host {
ip-address
|
hostname
}
username
{ traps | informs }
[ noauth | auth | priv ] [ timeout
seconds
] [ retries
retries
] [ udpport
port
]
[ filter
filtername
]
no snmp-server v3-host ip-address
{
traps
|
informs
}
•
ip-address
— Specifies the IPv4 address of the host (targeted recipient).
•
hostname
— Specifies the name of the host. (Range: 1-158 characters.)
The command allows spaces in the host name when specified in double
quotes. For example, #snmp-server v3-host “host name”.
•
username
— Specifies user name used to generate the notification.
(Range: 1-30 characters.)
• traps — Indicates that SNMP traps are sent to this host.
• informs — Indicates that SNMPv2 informs are sent to this host.
• noauth — Specifies sending of a packet without authentication.
• auth — Specifies authentication of a packet without encrypting it
• priv — Specifies authentication and encryption of a packet.
•
seconds
— Number of seconds to wait for an acknowledgment before
resending informs. This is not allowed for hosts configured to send traps.
The default is 15 seconds. (Range: 1-300 seconds.)
•
retries
— Maximum number of times to resend an inform request. This is
not allowed for hosts configured to send traps. The default is 3 attempts.
(Range: 0-255 retries.)
•
port
— UDP port of the host to use. The default is 162. (Range: 1-65535.)
•
filtername
— A string that is the name of the filter that define the filter for
this host. If unspecified, does not filter anything. (Range: 1-30 characters.)
2CSPC4.X7000-SWUM204.book Page 1602 Friday, March 15, 2013 8:22 AM