Dell Networking 7048, Reference Manual

Page: 574 / 1788

574
iSCSI Optimization Commands
AE Priority = priority configured for iSCSI PFC (the VPT value above). This
TLV is sent in addition to any Application Priority TLV information received
from the configuration source. If the configuration source is sending iSCSI or
FCoE application priority information, it is not necessary to enable iscsi cos
to send the iSCSI Application Priority TLV.
Example
In the following example, iSCSI is globally enabled.
console(config)#iscsi enable
iscsi target port
Use the
iscsi target port
command in Global Configuration mode to
configure iSCSI port(s), target addresses and names. To delete iSCSI port(s)
or target ports, use the no form of this command.
Syntax
iscsi target port
tcp-port-1
[
tcp-port-2.… tcp-port-16
[ address
ip-address
]
[ name
targetname
]
no iscsi target port
tcp-port-1
[
tcp-port-2.… tcp-port-16
[ address
ip-address
]
Parameter Description
Parameter Description
tcp-port
TCP port number or list of TCP port numbers on which iSCSI
target(s) listen to requests. Up to 16 TCP ports can be defined
in the system in one command or by using multiple commands.
ip-address
IP address of the iSCSI target. When the no form is used, and
the tcp port to be deleted is one bound to a specific IP address,
the address field must be present.
2CSPC4.X7000-SWUM204.book Page 574 Friday, March 15, 2013 8:22 AM