262
AAA Commands
Default Configuration
The local user database is checked. This action has the same effect as the
command
ip http authentication local
.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous
method returns an error, not if it fails. To ensure that the authentication
succeeds even if all methods return an error, specify
none
as the final method
in the command line. For example, if
none
is specified as an authentication
method after
radius
, no authentication is used if the RADIUS server is down.
Example
The following example configures the http authentication.
console(config)# ip http authentication radius local
ip https authentication
Use the
ip https authentication
command in Global Configuration mode to
specify authentication methods for https server users. To return to the default
configuration, use the
no
form of this command.
Syntax
ip https authentication
method1
[
method2
...]
no ip https authentication
Parameter Description
method1
[
method2
...] — Specify at least one from the following table:
Keyword
Source or destination
local
Uses the local username database for authentication.
none
Uses no authentication.
2CSPC4.X7000-SWUM204.book Page 262 Friday, March 15, 2013 8:22 AM
Summary of Contents for Networking 7048
