Dell Networking 7048, Reference Manual

Page: 452 / 1788

452
Ethernet CFM Commands
ethernet cfm mep archive-hold-time
Use the ethernet cfm mep archive-hold-time command in Interface
Configuration mode to maintain internal information on a missing MEP. Use
the no form of the command to return the interval to the default value.
Syntax
ethernet cfm mep archive-hold-time
hold-time
Parameter Description
Default Configuration
No MEPs are preconfigured.
Command Mode
Interface Configuration
User Guidelines
The hold time should generally be less than the CCM message interval.
Example
The following example sets the hold time for maintaining internal
information regarding a missing MEP.
console(config)#ethernet cfm mep archive-hold-time 1200
ethernet cfm mip level
Use the ethernet cfm mip level command in Interface Configuration mode
to create a Maintenance Intermediate Point (MIP) at the specified level. The
MEPs are configured per Maintenance Domain per interface. Use the no
form of the command to delete a MIP.
Parameter Description
hold-time The time in seconds to maintain the data for a missing MEP
before removing the data. The default value is 600 seconds.
2CSPC4.X7000-SWUM204.book Page 452 Friday, March 15, 2013 8:22 AM