c. Release the cables from the placeholders [3].
d. Remove the screw that secures the power and volume control board to the computer [4].
e. Lift the power and volume control board away from the computer [5].
Installing the power and volume control board
1.
Place the power and volume control board into the slot on the computer.
2.
Tighten the screw to secure the power and volume control board to the computer.
3.
Align the cables through the placeholders.
4.
Connect the power and volume control board to the connector on the system board.
5.
Affix the adhesive tape to secure it.
6.
Install the:
a.
b.
7.
After working inside your computer
.
18
Summary of Contents for Latitude 3379
Page 1: ...Dell Latitude 3379 Owner s Manual Regulatory Model P69G Regulatory Type P69G001 ...
Page 10: ...2 System overview System top view 1 keyboard 2 palmrest 3 touchpad 10 ...
Page 15: ...3 Using a plastic scribe pry the back cover from the edges and remove it from the computer 15 ...
Page 55: ...q battery r base cover 3 Follow the procedure in After working inside your computer 55 ...
