4.
To remove the LED board:
a. Lift the latch and disconnect the LED board cable [1].
b. Release the LED board cable from the computer [2].
c. Peel the adhesive tape to access the LED board [3].
d. Lift the LED board away from the computer [4].
Installing the LED board
1.
Place the LED board into the slot on the computer.
2.
Affix the adhesive tape to secure the LED board to the computer.
3.
Affix the LED board cable and connect the LED board cable to the connector.
4.
Install the:
a.
b.
5.
After working inside your computer
.
29
Summary of Contents for Latitude 3379
Page 1: ...Dell Latitude 3379 Owner s Manual Regulatory Model P69G Regulatory Type P69G001 ...
Page 10: ...2 System overview System top view 1 keyboard 2 palmrest 3 touchpad 10 ...
Page 15: ...3 Using a plastic scribe pry the back cover from the edges and remove it from the computer 15 ...
Page 55: ...q battery r base cover 3 Follow the procedure in After working inside your computer 55 ...
