Installing the Input/Output (I/O) board
1.
Place the I/O board into the slot on the computer.
2.
Tighten the screws to secure the I/O board to the computer.
3.
Connect the coin cell battery and power and volume button board cables to the connector on the
I/O board.
4.
Connect the I/O board cable to the connector on the I/O board.
5.
Affix the adhesive tape to secure the I/O board cable
6.
Install the:
a.
b.
7.
After working inside your computer
.
Power connector
Removing the power connector port
1.
Before working inside your computer
2.
Remove the:
a.
b.
3.
To remove the power connector port:
a. Disconnect the power connector port cable from the connector on the system board [1].
b. Remove the screw that secures the power connector port to the computer [2].
c. Lift the power connector port away from the computer [3].
31
Summary of Contents for Latitude 3379
Page 1: ...Dell Latitude 3379 Owner s Manual Regulatory Model P69G Regulatory Type P69G001 ...
Page 10: ...2 System overview System top view 1 keyboard 2 palmrest 3 touchpad 10 ...
Page 15: ...3 Using a plastic scribe pry the back cover from the edges and remove it from the computer 15 ...
Page 55: ...q battery r base cover 3 Follow the procedure in After working inside your computer 55 ...
