Installing the battery
1.
Insert the battery into the slot on the computer.
2.
Tighten the screws to secure the battery to the computer.
3.
Connect the battery cable to the connector on the system board
4.
5.
After working inside your computer
.
Power and volume control board
Removing the power and volume control board
1.
Before working inside your computer
2.
Remove the:
a.
b.
3.
To remove the power and volume control board:
a. Peel the adhesive tape [1].
b. Disconnect the power and volume control board cable from the connector on the system board
[2].
17
Summary of Contents for Latitude 3379
Page 1: ...Dell Latitude 3379 Owner s Manual Regulatory Model P69G Regulatory Type P69G001 ...
Page 10: ...2 System overview System top view 1 keyboard 2 palmrest 3 touchpad 10 ...
Page 15: ...3 Using a plastic scribe pry the back cover from the edges and remove it from the computer 15 ...
Page 55: ...q battery r base cover 3 Follow the procedure in After working inside your computer 55 ...
