Verifying system memory in setup
1.
Turn on or restart your laptop.
2.
Perform one of the following actions after the Dell logo is displayed:
• With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot
selection menu, tap F12.
• Without keyboard — When the
F12 boot selection
menu is displayed, press the Volume Down
button to enter BIOS setup. To enter the Boot selection menu, press the Volume Up button.
3.
On the left pane, select
Settings
→
General
→
System Information
,
The memory information is displayed on the right pane.
Testing memory using ePSA
1.
Turn on or restart your laptop.
2.
Perform one of the following actions after the Dell logo is displayed:
• With keyboard — Press F2.
• Without keyboard — Press and hold the
Volume Up
button when the Dell logo is displayed on the
screen. When the F12 boot selection menu is displayed, select
Diagnostics
from the boot menu,
and press Enter.
The PreBoot System Assessment (PSA) starts on your laptop.
NOTE: If you wait too long and the operating system logo appears, continue to wait until you
see the desktop. Turn off the laptop and try again.
Intel chipset drivers
Verify if the Intel chipset drivers are already installed in the laptop.
66
Summary of Contents for Latitude 3379
Page 1: ...Dell Latitude 3379 Owner s Manual Regulatory Model P69G Regulatory Type P69G001 ...
Page 10: ...2 System overview System top view 1 keyboard 2 palmrest 3 touchpad 10 ...
Page 15: ...3 Using a plastic scribe pry the back cover from the edges and remove it from the computer 15 ...
Page 55: ...q battery r base cover 3 Follow the procedure in After working inside your computer 55 ...