Steps
1. Align the notch on the 2280 solid-state drive with the tab on the solid-state drive slot.
2. Slide the 2280 solid-state drive firmly into the solid-state drive slot at an angle.
3. Place the solid-state drive thermal plate over the solid-state drive.
4. Align the screw holes on the solid-state drive and thermal plate with the screw hole on the palm-rest and keyboard
assembly.
5. Replace the two (M2x2) screws that secure the 2280 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Exit
.
After working inside your computer
.
Memory
Removing the memory module
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
4. Remove the
.
5. Remove the
.
About this task
NOTE:
Latitude 5521 supports two memory slots.
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
32
Removing and installing components
Summary of Contents for Inspiron 5521
