Removing and Replacing Parts : Dell Inspiron 2500 Systems
Removing and Replacing Parts
Dell™ Inspiron™ 2500 Systems
Preparing to Work Inside the Computer
Display Assembly Bezel and Panel
Microprocessor Thermal Cooling Assembly
Video Memory Cache Card (Optional)
Battery and Media Bay Latch Assemblies
Preparing to Work Inside the Computer
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage or
inoperability due to servicing not authorized by Dell is not covered by your warranty.
HINT:
Unless otherwise noted, each procedure in this document assumes that a part can be replaced by
performing the removal procedure in reverse order.
NOTICE:
To dissipate any static electricity while you work, periodically touch an unpainted metal surface
on the surface of the computer, such as the I/O panel on the back of the computer chassis.
NOTICE:
Handle components and cards with care. Do not touch the components or contacts on a card.
Hold a card by it edges or by its metal mounting bracket. Hold a component such as a microprocessor by
its edges, not by its pins.
1. To avoid damaging the computer, perform the following steps before you begin working inside the
computer.
2. Make sure that the work surface is clean to prevent scratching the computer cover.
3. Save any work in progress and close all open programs.
HINT:
Make sure the computer is turned off and not in standby or hibernate mode. If you cannot shut
down the computer using the computer's operating system, press and hold the power button for 4 seconds.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (1 of 46)6/21/2004 12:45:37 AM
