Dell Inspiron 2500 Factory Service Manual Download Page 113

Page: 113 / 118

Removing and Replacing Parts : Dell Inspiron 2500 Systems

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the

system board

3. Remove the three 4-mm screws from the fan assembly.

4. Disconnect the two fan cables from the system board.

5. Pull the fan assembly away from the back-panel bracket.

NOTICE:

When reconnecting the fan cables, connect the shorter cable to the connector closest to the fan

assembly. Route both cables so that they will not be pinched by the thermal cooling assembly.

RJ-11/RJ-45 Board

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed

battery.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an

unpainted metal surface on the computer.

Removing the Protective Covers From the RJ-11 and RJ-45

Connectors

1. Follow the instructions in "

Preparing to Work Inside the Computer

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (44 of 46)6/21/2004 12:45:37 AM

Summary of Contents for Inspiron 2500























































































































Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands

Dell Inspiron 2500, Factory Service Manual

Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands