Dell Inspiron 2500 Factory Service Manual Download Page 80

Page: 80 / 118

Removing and Replacing Parts : Dell Inspiron 2500 Systems

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any installed

battery.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an

unpainted metal surface on the computer.

You must remove the optional Mini PCI card assembly before the system board assembly can be removed. A Mini

PCI card assembly may consist of a modem or a modem and network adapter combination. A modem or modem

and network adapter combination must be connected to the wiring harness as appropriate.

Removing the Mini PCI Card Assembly

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the 20-mm screw and lift out the Mini PCI card cover.

3. To release the Mini PCI card assembly, spread the metal securing tabs until the assembly pops up slightly.

4. Disconnect the assembly from the wiring harness.

5. Lift out the assembly and disconnect any attached cables.

Replacing the Mini PCI Card Assembly

1. Align the Mini PCI card assembly with the socket at a 45-degree angle, and press the Mini PCI card into the

socket.

2. Connect the wiring harness to the Mini PCI card assembly.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...hecked%20ok/Inspiron/2500/2500%20SM/remove.htm (11 of 46)6/21/2004 12:45:37 AM

Summary of Contents for Inspiron 2500























































































































Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands

Dell Inspiron 2500, Factory Service Manual

Search results

Summary of Contents for Inspiron 2500

Reviews:

Related manuals for Inspiron 2500

Brands by name

Popular brands