Dell Inspiron 14 5408 Service Manual Download Page 4

Page: 4 / 91

Power-adapter port............................................................................................................................................................. 41

Removing the power-adapter port.............................................................................................................................. 41
Installing the power-adapter port.................................................................................................................................41

Display assembly..................................................................................................................................................................42

Removing the display assembly................................................................................................................................... 42
Installing the display assembly......................................................................................................................................44

I/O board.............................................................................................................................................................................. 46

Removing the I/O board...............................................................................................................................................46
Installing the I/O board................................................................................................................................................. 47

Touchpad..............................................................................................................................................................................48

Removing the touchpad............................................................................................................................................... 48
Installing the touchpad..................................................................................................................................................49

Speakers................................................................................................................................................................................51

Heat sink...............................................................................................................................................................................56

Removing the heat sink................................................................................................................................................ 56
Installing the heat sink...................................................................................................................................................57

Power button with optional fingerprint reader................................................................................................................ 57

Removing the power button with optional fingerprint reader................................................................................. 58
Installing the power button with optional fingerprint reader................................................................................... 59

System board.......................................................................................................................................................................60

Removing the system board........................................................................................................................................ 60
Installing the system board...........................................................................................................................................62

Palm-rest and keyboard assembly.................................................................................................................................... 65

Removing the palm-rest and keyboard assembly..................................................................................................... 65
Installing the palm-rest and keyboard assembly........................................................................................................66

3 Drivers and downloads................................................................................................................ 68

4 System setup.............................................................................................................................69

Updating BIOS on systems with BitLocker enabled..................................................................................................78
Updating your system BIOS using a USB flash drive................................................................................................ 78

Updating the Dell BIOS in Linux and Ubuntu environments...........................................................................................79
Flashing the BIOS from the F12 One-Time boot menu.................................................................................................. 79
System and setup password..............................................................................................................................................82

5 Troubleshooting.........................................................................................................................85

Contents

Summary of Contents for Inspiron 14 5408




























































































Search results

Summary of Contents for Inspiron 14 5408

Reviews:

Related manuals for Inspiron 14 5408

Brands by name

Popular brands

Dell Inspiron 14 5408, Service Manual

Search results

Summary of Contents for Inspiron 14 5408

Reviews:

Related manuals for Inspiron 14 5408

Brands by name

Popular brands