About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation procedure.
Steps
1. Place the power-adapter port into the slot on the palm rest and keyboard assembly.
2. Replace the (M2x3) screw that secures the power-adapter port on the palm-rest and keyboard assembly.
3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
4. Connect the power-adapter port cable to the system board.
5. Press down the right display-hinge and align the screw holes on the display hinges with the screw holes on the system board.
6. Replace the two (M2.5x5) screws that secure the right display-hinge to the system board.
Next steps
1. Install the
.
2. Follow the procedure in
after working inside your computer
.
Identifier
GUID-E641BD48-9062-46FE-8F5A-723887A0921D
Version
2
Status
Released
Display assembly
Identifier
GUID-E8A2E7C5-D091-4256-BAE6-35C9C1D999ED
Version
1
Status
Released
Removing the display assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
42
Removing and installing components
Summary of Contents for Inspiron 14 5408
